Новости с мира ПК
3 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд

Ssd health check

Best 10 Free Tools to Check SSD Health and Monitor Performance

SSDs are gradually intruding into the HDD market and replacing the role of regular hard disks in laptops and high-end desktops. Solid State Devices are offering high performance compared to traditional spinning hard disks. This flash-based memory device is consuming less battery power to read and write data with relatively high-speed that guarantee more battery life for your laptops.

The SSD system will boot will be ready to start work in seconds. If you have apps installed on SSD, the drive loads your apps faster and copies Gigabytes of data within a few seconds. SSDs are offering high performance, high-speed and less power consumption. Since this is a new technology, still SSDs are lagging behind hard disks in terms of lifespan and reliability.

Here is the list of best Windows and Mac Free Tools to Check SSD Health and Monitor Performance.

Crystal Disk Info

Crystal Disk Info helps you to monitor Solid State Hard Disk’s health status and temperature. You can use this tool to check your SSD and other Hard Disk types. Once you have installed this tool, this tool can monitor your system hard disk performance in real-time while you working on the system.

This tool can check your disk’s Read and Write speed and S.M.A.R.T. In addition to this, this open source SSD tool can project a lot of information about your SSD. This software can show you the error rates of the disk including “read error rate”. The performance measuring scales like seek time performance, throughput performance, etc. can be viewed in real-time with total Power-on time.

Key Features:

  • SSD Details (Firmware, Supported Features, Power On Hours, etc.)
  • S.M.A.R.T. Information (Read Error Rate, Seek Time Performance, Power Cycle Count, etc.)
  • Automatic Acoustic Management (AAM)/APM Control.
  • Alert Mail and Alarm Options.
  • Support most of the SSD Drives

Download for: Windows | Free


The Smartmontools package contains two utility programs (smartctl and smartd) to control and monitor your hard disk. This tool is offering the real-time monitoring of your Hard Disk. Smartmonotools can analyze and warn you about potential disk degradation and failure.

Smartmontools supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and tape devices. This disk tool can run on Mac OS X, Linux, FreeBSD, NetBSD, OpenBSD, Solaris, OS/2, Cygwin, QNX, eComStation, Windows and runs from a Live CD.

Key Features:

  • Real-time SSD performance monitoring
  • Disk failure and degradation alert
  • Supports all PC platforms
  • Support most of the SSD Drives

Download for: Windows | Mac | Linux | Live CD | Free

Hard Disk Sentinel

HDSentinel is a hard disk monitoring software that supports Windows, Linux and Dos. This SSD monitoring tool is built to find, test, diagnose and repair SSD problems. Disk Sentinel is also capable to display SSD health. Whether it is an internal or external SSD connected with USB or e-SATA, this tool can scan and recognize your SSD problems and generate reports with the possible fix to solve the errors.

After you install Hard Disk Sentinel, the tool runs in the background and check the SSD health status and warns the user if found any error. This SSD Monitoring tool can measure the disk transfer speed in real time which can be used as a benchmark or to detect possible hard disk failures, performance degradations.

Key Features:

  • Test and diagnosis of SSD errors.
  • General error reports
  • Run in the background in real-time
  • Benchmark tool to alert performance degradations.
  • Support most of the SSD Drives

Download the free version: Windows | Linux | DOS | Free

Intel Solid-State Drive Toolbox

The Intel Solid-State Drive Toolbox is drive management software that allows you to monitor your drive health, estimated drive life remaining and S.M.A.R.T. Attributes. This SSD Toolbox can run quick and full diagnostic scans to test the read and write functionality of an Intel SSD.

This tool can optimize the performance of an Intel SSD using Trim functionality and update the firmware on a supported Intel SSD. You can check and tune your system settings for optimal Intel SSD performance, power efficiency, and endurance. This tool supports a Secure Erase of your secondary Intel SSD. If you are looking for a new SSD, here is a couple of SSDs from Amazon that seems like best sellers.

Key Features:

  • Monitor Drive health.
  • Estimate SSD drive life.
  • S.M.A.R.T. attributes even for non-intel drives.
  • Trim functionality
  • Performance boost feature.
  • Most features are available for Intel SSD Drives

Download for: Windows | Mac | Linux | Free

Crystal Disk Mark

If you need a real benchmarking tool to test your hard disk, Crystal Disk Mark is the right tool. This tool can test your Hard Disk in Sequential Reads/Writes, Random Reads/Writes and QD32 Modes.

If you want to compare your SSD performance, Read/Write speed in random and sequential with other manufacturers, or want to confirm your SSD is offering the same performance manufacturer specified, this is going to be the best open source tool to check the disk or multiple disks based on their read-write performance.

Key Features:

  • SSD Details (Firmware, Supported Features, Power On Hours, etc.)
  • SSD benchmarking and monitor performance.
  • Compare SSD performance with standard data.

Download for: Windows | Free

Samsung Magician

Samsung Magician software features simple, graphical indicators show SSD health status and Total Bytes Written (TBW) at a glance. You can decide SATA and AHCI compatibility and status. The updated Benchmarking feature lets users test and SSDs to compare performance and speed. This tool can use to optimize your Samsung SSD with three different profiles like Maximum Performance, Maximum Capacity, and Maximum Reliability along with detailed descriptions of each OS setting.

Samsung Magician tools let you check the sequential and random read/write speeds. This tool helps to optimize SSD, make sure your system is running always fast and up to the benchmark. The additional option can check TBW (Total Bytes Written), to assess the overall health and estimated remaining lifespan of your SSD. The system Compatibility Check to make sure no conflict with the SSD. The system and Secure Erase allows to wipe out the SSD securely to avoid and sensitive data loss. If you are a Mac user, you are out of luck with this tool, Samsung magic is available only for Windows.

Key Features:

  • SSD Details (Firmware, Serial Number, Power On Hours, etc.)
  • S.M.A.R.T. Information
  • Log temperature
  • SSD drive lifetime check.
  • Health monitoring
  • Disk Error Information Check
  • Most features are available for Samsung SSD Drives

Download for: Windows | Linux | Free

Crucial Storage Executive

Crucial SSD tool is a free SSD software to optimize the SSD performance. It can automatically update curial SSD firmware, perform an SSD health check and tweak for the best performanc.e. If you are worried about the security of your data, you can directly set or reset disk encryption password from Crucial SSD Software dashboard. Crucial offer the Momentum Cache feature the SSD operations unto 10 times faster. The software support only Windows at this moment.

Key Features:

  • Firmware update.
  • Monitor SSD’s operating temperature.
  • Real-time monitoring of SSD health.
  • Features support for Crucial SSD Drives.

Download for: Windows | Free

Toshiba SSD Utility

SSD Utility is for Toshiba Drives, a Graphical User Interface (GUI) based tool for managing OCZ SSDs. The dashboard provides a real-time overview of system status, capacity, interface, health, etc.

In addition to this real-time overview, the tool keeps update SSD firmware. Toshiba Utility can show you how much life left in the SSD, and correct the modes to achieve the best performance of SSD. The SSD tuner lets you tune the SSD for long-term life. The Toshiba SSD utility let you find out if your SSD is hooked up to the suitable ports. This SSD Utility can set in the correct modes to achieve high performance.

Key Features:

  • Real-time overviews of the system status
  • SSD health information
  • The life expectancy of SSD
  • Tweak for high performance
  • OS Tuner to chose SSD operate-mode
  • Most features are available for Toshiba SSD Drives

Download for: Windows | Mac | Free

Kingston SSD Manager

Kingston SSD manager is designed for Kingston SSD users to monitor the performance and health status. The software can be used to update the SSD firmware, disk usage check, disk over provision, etc. The Kingston software can securely erase all data from the SSSD without any trace to score all your information. The software support only Windows.

Key Features:

  • SSD Drive details (Model name, firmware version, etc.)
  • Monitor drive health in real-time.
  • Disk usage log.
  • View and export SSD health report.
  • Designed for Kingston SSD.

Download for: Windows | Free

SSD Life

SSD Life is a dedicated tool for Solid State Drives. This tool can measure your SSD’s lifespan. You can back up your data before your SSD take its last breath. This is the best tool to install on your computer and monitor SSD’s health. SSD Life can display the disk data in real-time to inform you about any critical defects. SSDLife is checked with most of the SSD drives to check compatibility. This SSD tool can work with most SSD manufacturers such as Kingston, OCZ, Apple MacBook Air built-in SSD.

Key Features:

  • Drive details (Trim support, Firmware, etc.)
  • SSD health status
  • Lifetime calculation of SSD
  • Support most of the SSD Drives

Download for: Windows (free trial)


Do you ever wonder how long your SSD is going to last? This is a tool you must have to install on your computer and let it run in the background. This tool track daily Writes and the total usage of your SSD on a daily basis. SSDReady tool can predict how long your SSD going to live. This will give you enough time to prepare and shop around for next SSD. In addition to this, this Solid Disk tool can feedback you what to optimize if it finds too many disks writes, to extend your SSD life.

Key Features:

  • Drive details (Trim support, Firmware, etc.)
  • Predict lifetime of SSD
  • Support most of the SSD Drives

SSDs are more fragile than HDs when you compare the lifespan. However, these tools let you check the performance and lifespan of the drive. For Mac users, there are not many tools available to maintain and check performance for SSD. Most of the tools are build for Windows users. However, we listed the best SSD Tools for Mac to Maintain SSD Drive.

There are several tools available to Tweak SSD or enable TRIM on SSD to improve performance. These tools are recommended to use if you see any performance issue while working on your system with SSD. There are SSDTweker and TRIM Enabler to try on your SSD for performance improvement and we provided the list of tools on Tools to Tweak SSD article.

Once you made up your mind to buy SSD, please see our recommended list of SSDs for Mac, if you own a Windows system, please refer the list for best Solid State Drives for Windows. It is always better to keep an eye on your SSD. Install at least one SSD health monitoring tool for your laptop. To be safe, keep a backup disc for the entire system. Backup up your computer once in a month or a week based on your computer use.

Top 8 SSD Tools to Check SSD Heath and Performance [MiniTool Tips]

By Amy | Follow | Last Updated December 25, 2019

Summary :

Are you utilizing SSD now? Do you know your SSD performance? In fact, you can conduct a test via professional SSD testing software. This post will show you top 8 SSD health check tools. You can obtain detailed information about these tools in MiniTool.

Читать еще:  Как проверить ssd на работоспособность

Quick Navigation :

As it known to all, SSD is taking the place of HDD with its high performance. Therefore, most people utilize SSD as their operating system drive. In fact, as for SSD VS HDD, SSD has more advantages. Though SSDs are fast and more preferable, they are quite fragile.

Based on that fact, you should run SSD health check tool or optimization programs occasionally. By doing so, you can maximize your SSD’s performance and lifespan.

Nowadays, there are many SSD testing programs on the market, and they boast different features for managing SSD. To be specific, what does an SSD health check tool do? Well, for most SSD health check tools, they can be used to test the SSD transfer speed, measure SSD performance, optimize SSD, etc. Some of them even allow you to erase SSD securely.

Given to that fact, you’d better read the software’s description carefully to check if it contains the feature you need.

The following will give you more information about what an SSD health check tool performs.

Check SSD Health

The first thing that an SSD health check tool does is to tell you how healthy your SSD is. Some SSD health check tools will show you the current state of your SSD and give you a health status, such as Crystal Disk Info.

While others such as MiniTool Partition Wizard Free Edition can detect how many bad sectors on your SSD, which can indicates your SSD condition. In a word, you can check whether your SSD is in good health easily with these tools.

Optimize SSD Performance

Some SSD tools enable you to carry out garbage collection and other parameters, which can improve the performance of the drive.

Most SSD health check tools allow you to optimize or tune your SSD for different demands such as Intel SSD Toolbox, Samsung Magician, etc. However, you may notice that some utilizes may improve the drive’s performance at the cost of losing some storage capacity.

Test SSD Speed

One of the basic features of SSD health check tools is SSD/Disk benchmark, which can measure your SSD performance by testing the SSD transfer speed. You will know whether the write/read data given by manufacturer is accurate after testing the speed of your SSD.

Besides, you will have a rough understanding of your SSD performance.

Secure Erase SSD

If an SSD includes sensitive information and needs to be wiped, erasing the data on the drive is a wise operation. The problem lies in that many SSD tools delete data by overwriting a drive for many times, causing accessing storage areas failure. For example, blocks can be marked as bad, or overprovisioning and wear leveling blocks.

While some SSD secure erase tools offer access to a hardware-based secure erase routine. During this process, SSD’s controller ensures that all the storage including the areas that cannot be normally and directly accessed can be cleaned entirely.

There are many SSD health check tools available in the market. Which one should you pick? 8 best SSD testers are introduced in this post. You can take them as your reference.

8 Best SSD Health Check Tools

  1. MiniTool Partition Wizard
  2. Intel SSD Toolbox
  3. Samsung Magician
  4. Crystal Disk Info
  5. Smartmonotools
  6. Hard Disk Sentinel
  7. Toshiba SSD Utility
  8. SSD Life

Top 8 SSD Health Check Tools

MiniTool Partition Wizard

MiniTool Partition Wizard is a powerful partition manager & SSD health check tool, which can help you format drive, recover missing data, analyze disk usage, migrate OS to SSD/HD, etc. The Disk Benchmark feature enables you to measure disk performance by using variable transfer sizes and test lengths for both sequential and random read/write speeds.

In addition, you can finish the whole operation in a few clicks. With this wonderful SSD benchmark tool, you can test any manufacturer’ RAID controllers, storage controllers, hard drives and SSD drives. However, if the transfer size has a large span, the whole testing process may take you some time.

You can download MiniTool Partition Wizard by clicking the button below.

After downloading and installing MiniTool Partition Wizard, please follow the steps below to perform the disk benchmark operation.

Step 1: Click Launch Application to enter its main interface.

Step 2: Click on Disk Benchmark on the top of the main page.

Step 3: In the pop-up window, you can set HD/SSD disk testing parameters including testing drive, transfer size, queue number, cool down time, thread number, total length, and test mode according to your demand. After that, click on Start to execute the operation.

Step 4: Wait for the completion of operation. Different test settings can take you different time. After the operation finishes, you will get an intuitive table just as the below picture shown.

Just as you see, MiniTool Partition Wizard enables you to perform SSD benchmark with ease. Besides, you can view the results in a direct way. So, please don’t hesitate to download it.

Intel SSD Toolbox

Intel SSD Toolbox is a piece of drive management software that enables you to supervise your drive health, estimate the remaining drive life, as well as S.M.A.R.T. attributes. It can run fast and full diagnostic scans to examine the read and write functionality of an Intel SSD.

Besides, it allows you to update firmware on a supported Intel SSD and improve the performance of an Intel SSD by making using of Trim feature. Then, you are able to obtain the best Intel SSD performance, power efficiency and endurance by checking and adjusting system settings.

With Intel SSD Toolbox, you can perform a secure erase of your secondary Intel SSD. That’s all the features of Intel SSD Toolbox.

Samsung Magician

Compared with Intel SSD Toolbox, Samsung Magician is more complicated. That is because it looks more like a management suite than a simple application. Samsung Magician allows you to create profiles, adjust performance ratings, and set the maximum capacity and reliability.

If you want to avoid any incompatibilities with operating system, you can either to update firmware or download the Magician. Actually, optimization and diagnostics are its basic features. What Samsung Magician offers through its RAID mode is the highlighted point.

The RAID mode can use 1GB of your system’s DRAM as cache for hot data or frequently-accessed data. In this way, the overall performance, especially the read speed will be improved.

More importantly, if you are not satisfied with the diagnostics results and your benchmarks, you can keep optimizing your Samsung SSD for your present OS through the OS optimization feature in Samsung Magician.

Crystal Disk Info

Crystal Disk Info is a piece of open software that can offer you the health and temperature information of your SSD or HDD. It is one of the free tools that have the capability to collect accurate data for both types of storage drives and work with drives from all manufacturers.

At the same time, general information is also provided for you. Crystal Disk Info allows you to check firmware updates, port details, buffer size, read and write speeds, power consumption and S.M.A.R.T. information. You can test SSD speed through it with ease.

What’s more, you can also use it to do some slight adjustments of power management and notifications. The only disadvantages of Crystal Disk Info are that it won’t work on Linux-based systems and cannot execute firmware updates.


The Smartmonotools includes two utility programs (smartctl and smartd), which can help you control and monitor your hard drive. It offers you real time monitoring of your hard disk. What’s more, it will analyze and inform you about possible disk degradation and failure.

Smartmonotools supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and type devices. You can run this disk tool on Mac OS X, Linux, FreeBSD, NetBSD, OpenBSD, Solaris, OS/2, Cygwin, QNX, eComStation, Windows and a Live CD.

Hard Disk Sentinel

Hard Disk Sentinel is a hard disk monitoring tool that supports Windows, Linux and Dos operating system. It is designed to find, diagnose and repair SSD issues. Disk Sentinel is also able to show you SSD health condition. It can scan either an internal or external SSD connected with USB or e-SATA and find potential issues. After that, it will generate reports with the possible fixes to repair the errors.

After you install Hard Disk Sentinel, it will run in the background and check the SSD health condition automatically. If it finds any error, it will inform you immediately. With this SSD monitoring tool, you can test the hard disk’s transfer speed in real time.

By doing so, you will know your disk benchmark, potential hard disk failures, as well as performance degradations.

Toshiba SSD Utility

If you are using OCZ SSD now, Toshiba SSD Utility is possibly the best software that you can utilize regardless of your operating system. You can monitor your SSD in real time and obtain SSD information including SSD health, remaining life, storage space and overall performance very quickly via using Toshiba SSD Utility.

Additionally, it can also be used as a drive manager and optimization tool. You are able to switch between multiple modes based on your SSD or your rig’s intended use such as gaming, workstation, video editing and so on. By using these preset modes, you can improve the drive’s performance and increase its lifespan in various cases.

SSD Life

SSD Life mainly focuses on SSD health and remaining life instead of other metrics. It has great compatibility with major SSD manufacturers like Apple MacBook Air’s own SSD. It allows you to run diagnostics for SSD health, lifespan and overall performance. SSD Life will tell you accurate results and any important flaws that can influence the remaining lifespan or read/write speeds.

However, the free trial version only lasts seven days and has limitations on some features. After the trial expiration date reaches, you need to pay for it for later-on using.


Now, all the contents about SSD health check tools have been told to you. It’s your turn to make a choice. You can pick one according to your demand. If you pick MiniTool Partition Wizard, you can check SSD health by following the given steps in the post. While for other SSD health check

tools, you should follow the on-screen steps to finish the operation.

If you have any doubt or advice to MiniTool software, please contact us by writing an email directly via [email protected] .

SSD Health Check FAQ

There are 5 signs indicate that your SSD is failing.

  1. There are errors involving bad blocks.
  2. Files cannot be read or written.
  3. The file system needs to be repaired.
  4. Your computer frequently crashes.
  5. Your drive becomes read-only.

If these signs appear, it indicates that your SSD is failing and you need to take some measure.

Проверка SSD диска: лучшие утилиты для диагностики и улучшения работы

Проверка SSD диска при помощи утилит представляет собой универсальный метод, который выполняет сразу несколько задач.

  • Первая – проверка накопителя на наличие ошибок.
  • Вторая – контроль эксплуатационного срока устройства.

Наличие и периодическое использование таких программ для владельца SSD-диска не только желательно, но и необходимо.

Ведь ресурсы этих комплектующих современных ПК и ноутбуков ограничены по сравнению с HDD, а опасность потери данных – выше.

Хотя эти недостатки вполне компенсируются значительным количеством плюсов от использования SSD, обусловленных отличием их конструкции от стандартных жёстких дисков.


Особенности использования дисков SSD

Диски SSD представляют собой твердотельные энергонезависимые накопители, принцип действия которых напоминает работу флеш-памяти – SD и microSD карт, USB-флешек и других носителей информации.

Такие устройства не имеют движущихся частей, а для передачи данных используют микросхему DDR DRAM.

Параллельная запись информации одновременно на несколько элементов памяти и отсутствие необходимости в перемещении считывающих информацию головок (характерных для HDD) позволяют увеличить скорость процесса в несколько раз.

Читать еще:  Как узнать какой контроллер на ssd

И, если средняя скорость чтения современного жёсткого диска составляет около 60 МБ/с, даже средний SSD-диск способен выдать показатели в 4–5 раз выше.

При записи данных превышение может оказаться меньшим, однако процесс происходит всё равно намного быстрее.

Рис. 1. Сравнение показателей скорости чтения и записи диска SSD и HDD.

Особое значение скорость загрузки имеет для тех компьютеров, на которых установлено несколько ресурсоёмких приложений.

В этом случае только загрузка системы Windows происходит в течение 15–20 с для твердотельного накопителя и от 30 до 60 с для жёсткого диска.

Такое же улучшение скорости происходит и в процессе запуска программ, и записи данных.

К другим преимуществам от использования SSD-дисков (подробнее читайте здесь) стоит отнести:

  • стойкость к ударам и падениям. Параметр, важный для ноутбуков, жёсткие диски в которых часто выходят из строя именно из-за механических повреждений;
  • компактность – многие диски ненамного превышают по размеру аккумулятор мобильного телефона, другие имеют габариты планки памяти;
  • расширенный температурный диапазон работы диска;
  • минимальное энергопотребление и отсутствие шума при работе.

Рис. 2. Сравнение размеров HDD, стандартного SSD и накопителя формата mSATA.

Вместе с тем, работа SSD связана и с определёнными недостатками. К ним относят сравнительно высокую стоимость накопителя, хотя при увеличении ёмкости соотношение цены к объёму становится меньшей.

Второй важный минус – ограниченный ресурс SSD-дисков, из-за чего их рекомендуется периодически проверять.

Читайте также:

Настройка SSD под Windows 10: Полная step-by-step инструкция

Диагностика накопителей

Главная задача проверок дисков SSD заключается в диагностике его состояния и выдаче информации о наличии ошибок, ресурсе и предполагаемом эксплуатационном сроке.

Это даёт возможность пользователю заранее узнать о будущих проблемах с накопителем, ведущих к непредсказуемой потере информации.

Кроме того, по результатам проверки можно запланировать финансовые расходы на покупку нового SSD-диска, стоимость которого может не позволить быстро найти такую сумму, если проблема возникла неожиданно.

Кроме того, проверка накопителя не занимает много времени и даже не требует покупки дорогого программного обеспечения.

Утилиты можно скачать в сети бесплатно или приобрести за сумму, не превышающую стоимость стандартной антивирусной программы.

Тогда как восстановление утраченной информации с SSD, в отличие от жёстких дисков, невозможно.

Лучшие утилиты для проверки SSD-дисков

Для проверки состояния жёсткого диска производители накопителей и сторонние разработчики выпустили уже десятки приложений.

Большая их часть бесплатная или условно бесплатная, то есть требующая оплаты только через некоторое время после начала использования.

Эффективность у них практически одинаковая, а отличия заключаются в удобстве использования и функциональности.

SSD Life

Приложение имеет 3 версии – одну портативную и две требующих установки (бесплатную и усовершенствованную платную SSD Life Pro). Инсталлируемые программы отличаются возможностью работы в фоновом режиме, с отображением состояния накопителя в реальном времени. Среди функций утилиты стоит обратить внимание на возможность автоматической диагностики каждые 4 часа и сохранение результатов предыдущих проверок.

Рис. 3. Главное окно SSD Life при проверке нового и старого SSD.


Вторая версия постоянно контролирует работу накопителя, сообщая пользователю об обнаружении битых секторов и других ошибок. Зато portable-вариант не требует установки и может использоваться как на чужом, так и на рабочем ПК.

Рис. 4. Сканирование 64-гигабайтного SSD-диска с помощью приложения CrystalDiskInfo.


Процесс проверки твердотельного накопителя может осуществляться и с помощью простой программы DiscCheckup. Её задачей является определение скорости и работоспособности накопителя (причём, одновременно всех, которые установлены на компьютере, включая и SSD, и HDD). Cреди выдаваемой на экран информации можно найти:

  • количество ошибок;
  • температуру диска;
  • характеристики скорости чтения и записи.

Рис. 5. Проверка дисков с помощью утилиты DiscCheckup.

Материалы, которые могут быть вам интересны:

SSD Ready

Рис. 6. Приложение SSDReady.

Hard Disk Sentinel

  • работа с дисками SSD, с накопителями IDE и SATA, и даже USB-носителями;
  • отображение информации о текущей и минимальной температуре;
  • указание количества ошибок и наработки диска в часах;
  • указание не только текущего, но и максимально возможного для диска режима передачи информации.

Рис. 7. Работа с программой Hard Disk Sentinel.


Рис. 8. Отчёт программы HDDScan.

SSD Tweaker

Рис. 9. Рабочее окно программы SSD Tweaker.

HD Tune

Рис. 10. Диагностика с помощью HD Tune Pro.

При этом, если слишком важной информации на накопителе не содержится, периодичность проверки можно изменить, установив, например, диагностику не каждые 4 часа, а раз в сутки. Более того, несмотря на больший уровень надёжности дисков HDD, с помощью большинства тех же приложений можно периодически контролировать и их состояние, повышая безопасность хранения данных.

Видеоинструкция по проверке SSD диска

Проверка SSD диска: лучшие утилиты для диагностики и улучшения работы

Проверка SSD диска: лучшие утилиты для диагностики и улучшения работы

Богдан Вязовский

«Мы живем в обществе, где технологии являются очень важной частью бизнеса, нашей повседневной жизни. И все технологии начинаются с искр в чьей-то голове. Идея чего-то, чего раньше не существовало, но однажды будет изобретено, может изменить все. И эта деятельность, как правило, не очень хорошо поддерживается»

Как проверить состояние SSD накопителя (утилиты для диагностики «здоровья» SSD)

Доброго времени суток!

SSD накопители в последнее время стали не менее популярны, чем классические жесткие диски (HDD). И вопрос их состояния (многие пользователи применяют другой термин — здоровье) как никогда актуален. Вовремя узнав, что с диском что-то не то, можно сделать резервную копию и сохранить все свои файлы (да и нервы тоже 😉).

Собственно, в этой заметке хочу порекомендовать несколько утилит, с помощью которых можно относительно быстро проверить здоровье вашего SSD. Сразу хотелось бы отметить один момент: не все модели дисков позволяют оценить их степень износа (не предоставляют статистику по записанным данным), а потому некоторые «прогнозы» могут быть неточными (т.е. всецело доверять им нельзя, однако, вовремя предупредить что что-то не так — они смогут!) .

Также обратите внимание, что в этой статье я касаюсь исключительно состояния SSD (если вам нужно протестировать скорость его работы — см. статью, ссылку на которую привожу ниже).

В помощь!

Проверка состояния SSD накопителя

SSD Life

Здоровье диска — отличное! Срок службы примерно до 2024 года!

Одна из самых простых и удобных утилит для контроля за состоянием SSD. Утилита может незаметно «существовать» в системном трее и вовремя вам известить, если что-то пойдет не так (например, возрастет температура или показатель здоровья диска резко опуститься на критическую величину) .

Для начала работы — достаточно загрузить и запустить (т.е. никаких сложных настроек, см. скрин выше, все на русском и доступно для понимания).

Как утилита определяет степень износа и здоровья накопителя

Дело в том, что у всех дисков (SSD, HDD) есть система само-диагностики, называемая SMART (т.е. диск сам оценивает некоторые свои показатели работы). Так вот, у SSD есть определенное количество циклов записи/перезаписи (т.е. на диск, скажем в 120 ГБ, можно записать 40 ТБ, после чего он выйдет из строя) .

Таким образом, утилита «смотрит» SMART (в том числе и сколько данных была записано на накопитель) и после автоматически подсчитывает показатель здоровья.

Обратите внимание на скриншот ниже — SSD Life вовремя предупреждает, что здоровье диска опустилось на критическую низкую величину в 4% и пора заменить его.

Так выглядит диск, с которым не все в порядке. (SSD Life)

В общем и целом, на мой скромный взгляд — одна из лучших утилит в своем роде.

HD Tune

А вот эта программа — настоящий комбайн, который способен заменить сразу десятки других «мелких» утилит. Позволяет не только оценить «здоровье» диска, но и провести тест на ошибки, скорость чтения/записи, удалить безвозвратно файлы, смотреть температуру, данные о модели, серийном номере, уменьшить уровень шума (это для HDD и пр.).

Что касается проверки состояния накопителя — рекомендую воспользоваться вкладкой «Health» (если англ. версия). Кстати, программа может «висеть» в трее и периодически проверять эти данные, и как только статус OK сменится — вовремя известить вас об этом.

Оценка здоровья диска в HD Tune

Также порекомендовал бы зайти во вкладку «Error Scan» и проверить диск на наличие ошибок. В идеале все кубики должны быть зелеными.

Проверка диска на ошибки (HD Tune)

Для оценки скорости работы SSD — в HD Tune есть вкладка «Benchmark». Программа в процессе теста построит график скорости чтения/записи (в идеале он должен напоминать прямую — это означает, что диск ведет себя стабильно и не «сбрасывает» скорость во время работы) .

Оценка скорости чтения и записи (HD Tune)


Очень знаменитая утилита, предназначенная для диагностики HDD и SSD дисков. Чем она отличается от многих остальных: CrystalDiskInfo не просто даст показания SMART диска, но и оценит их — например, напишет, что с вашим диском все хорошо (это удобно для многих начинающих пользователей, кто не шибко разбирается в этих «штуках»: ведь гораздо проще просто посмотреть на техсостояние диска, чем анализировать атрибуты SMART. См. пример ниже) .

CrystalDiskInfo — техсостояние хорошее

Причем, помимо простой оценки техсостояния, утилита позволяет узнать достаточно много информации о накопителе:

  • температуру работы;
  • серийный номер, производителя;
  • интерфейс;
  • сколько ГБ прочитано/записано на диск;
  • поддерживаемые стандарты и пр.

В общем и целом, утилита крайне удобна и очень советую ее иметь на своей резервной флешке (я не раз ее рекомендовал на страницах сайта. ) .

В качестве примера: как выглядит диск, с которым не все в порядке (CrystalDiskInfo)

Hard Disk Sentinel

Очень мощная и эффективная программа для получения максимум информации о жестких дисках, твердотельных накопителях и пр. Позволяет оценить производительность и здоровье диска, узнать его время работы, сколько данных на него записано, и сколько времени приблизительно диск еще проработает (см. скриншот ниже) . Отмечу, что такая оценка делается программой автоматически (данные, разумеется, приблизительные).

Hard Disk Sentinel — оценка состояния накопителя / Кликабельно

Для достоверности и актуализации данных, рекомендуется программу добавить в автозагрузку для постоянного мониторинга за состоянием накопителей в системе. Как только Hard Disk Sentinel определит, что с диском что-то не то — программа тут же вас известит об этом. Удобно!

Не могу не отметить, что помимо авто-оценок, в программу встроено несколько полезных вкладок:

  • температура (показывается не только текущая, но и макс., минимальная. Также при постоянном использовании строится график);
  • SMART;
  • «Инфо» — вкладка позволяет узнать максимум информации о диске (см. скрин ниже);
  • Производительность;
  • Предупреждения (полезно, если что-то пропустили).

Hard Disk Sentinel — инфо о диске / Кликабельно

Разумеется, в программу встроено несколько тестов: можно провести короткую и расширенную диагностику диска, проанализировать поверхность, подвод головки и пр. (благодаря многообразию тестов — можно проверить сразу все свои накопители: HDD, SSD, SSHD и пр. 👌) .

Тест жесткого диска

Data Lifeguard Diagnostic for Windows

Вообще, эта утилита предназначена для накопителей от WD (но работает она практически с любыми дисками). Утилита позволяет проверить о ценить техсостояние диска, также можно посмотреть показания SMART, объем дисков, серийные номера и пр. информацию.

В программе реализовано два вида тестирования:

  • быстрый (Quick test) — за 1-2 мин. утилита даст оценку вашему накопителю (проверив комплекс параметров);
  • расширенный (Extend test) — утилита проверит ваш диск на bad-блоки и по возможности попытается их исправить (аналогично утилите Виктории).

Для запуска быстрой диагностики: откройте утилиту, нажмите правой кнопкой по нужному накопителю, и выберите опцию «Run Diagnostics» . (см. скрин ниже)

Data Lifeguard Diagnostic for Windows — запуск диагностики

Далее укажите вариант «Quick test» (это и есть быстрый тест).

Data Lifeguard Diagnostic for Windows — Quick Test — быстрый тест

2 минут утилита оценит ваше состояние диска — в идеале вы должны увидеть «зеленую» галочку (что тест пройден) — то значит, что с диском все в порядке.

На этом пока всё. Дополнения были бы весьма кстати.

10 Best Tools to Check SSD Health and Monitor Performance

SSDs are performance boosters to your system, and you must do all you can to keep them in good health and prevent any malware from infecting them. Certain tools can help keep our SSDs safe and prevent crashing, while also enhancing performance and endurance.

Some of them are listed below:

1. CrystalDiskMark

It is one of the best tools available to check the SSD on your system. Various parameters are taken into consideration while measuring the performance of your SSD.

CrystalDiskMark calculates your primary read and writes speed. It could be either sequential or random and the numbers obtained to provide a benchmark for what is optimal for your system.

Читать еще:  Как вставить ssd в ноутбук

Speeds are calculated using MB per second and tell you about all the disk operations. CDM comes free and lets you have a benchmark for a variety of different hardware like memory cards hard drives and RAM disks. There is a broad range of sizes available for your CDM to run the check.

You are allowed to choose the number of passes you want to accommodate between checks. You are also given the freedom to choose the data in a binary form or if you want you can arbitrarily feed the data.

See also: — Top 10 Best DVD Authoring Software for Windows
The input may affect the output on hardware compression, and installer and portable versions can be obtained. CDM is available with Microsoft Windows OS only.

2. AS SSD Benchmark

Another top ranked tool to check the status of your disk, AS SSD Benchmark is good at measuring the speed of your disk. The speed is one of the critical parameters, and you need to take care of what it requires at all times.

You can perform Random read and write tests to analyse the performance or even allows you to take subsequent tests if you want. Both tests can be carried out without using the cache.

AS SSD Benchmark runs tests to find out times required to access the SSD. The driver’s behaviours can also be checked with additional tests. You don’t even have to install the software on your machine to run it. It will run without being installed.

The software will tell you the number of SSDs on your machine without asking you to feed the data in manually in for the same.
You can select the SSD that you want to test. There are three types of SSD that you can perform. One is to determine the time consumed to read and write a file. If you want to determine the access time, then that is also possible.

You can save your SSD software to an external USB to run the software whenever you require it. It will tell you about the complexities on the drive and help you better the performance. It is free of cost and portable as well.

3. CrystalDiskInfo

It is a free software that is used to check the health of your SSD. It tells you the status on the monitoring, reporting and analysis performance of your SSD.

This is a quick tool and can say things like the current temperature and status of your system health – performance and optimisation. The screen will read out a variety of stuff about which data is up to date, and you can quickly work out which things are working in your favour and which aren’t. You can determine if things are going the way you want them to.

You can set alerts to notify you when there is something wrong with your system. You can receive audio alerts or eve have them send you a mail. Refreshing data at regular intervals is also possible.

You can figure out the performance values quickly by looking at the interface and find the health status and temperature. The interface also shows you the monitoring, reporting and real-time analysis of your system.

See Also: — Lifsoft Auto Power-on & Shut-down Software Review | Download Latest Version
However, the interface is not the most user-friendly, and you need to be of a technical background to correctly operate this software.
CrystalDiskInfo comes in two versions, one that can be installed and another which is portable.

4. SSD Life

This software can be used to determine the longevity of your SSD. It has a great option to create a backup of all your data and save it before it crashes or dies. SSD Life runs tests to give you real-time data and can inform you of the serious problems that may be present on your drive. It comes in an installed version and a portable version.

The software gives information about the data written on the drive, and you can find out the read information on the drive easily too. Data is always fetched for the entire lifetime of the drive and helps determine the capacity along with the amount of used and unused data.

This gives the performance of the drive alone with how it is running. You will know the extent of wear and tear in the drive, and under similar working conditions, it gives a report of how to gauge the future performance and longevity.

SSD Life is compatible with most drives in the market, and you can use it tom make corrective or preventive actions to make your drive even better.

5. Samsung Magician

This is versatile software built to control the performance of the SSD on your machine and keep a regular tab on it. Using Samsung Magician, you can maintain the information of your system along with your SSD.

You will receive information from your user system, and the software allows you certain functions to manage the performance using optimisation. In come cases the optimisation is automatic, and you can also benchmark to get the best performance. If there are any updates, the user will most likely be updated from time to time.

Certain add-ons will help you understand your SSD in greater details. SecureErase gives you the power to wipe your data in less than sixty seconds. You can have your software tell you the performance for other devices that may be connected to the system apart from the SSD.

Samsung Magician had a great user interface and looked quite good while at the same time being very easy to use. With this software, you can control the settings and check the performance according to the needs. There are settings to manage your power consumption as well, and you can revert to your old settings using the System Restore option.

You can even personalise your profile if the standard pattern doesn’t suit your requirements.

6. Intel Solid-State Drive Toolbox

This is a software toolbox that is very easy to operate and is regularly updated so that you are always on the top of things when it comes to managing your SSDs health. The user has the provision of garbage collection, and there is an automatic trigger that is scheduled at regular intervals.

The performance of your SSD can be boosted using the Trim function. Intel Solid-State Drive Toolbox allows you to customise your settings to ones that are set to your preference for the needs that you require. Usually, this includes a greater performance with low power consumption.

Sometimes you may also be given the feature to increase the longevity of your SSD, and all these factors are kept in mind while designing the customization settings of your software.

This software takes care of your SSD’s performance, time consumption and response time along with how much your SSD has worn out. You can undertake read and write tests to determine the access speeds and speed of different operations. All this can be resolved in no time at all.

7. SSD Ready

Used exclusively with Windows, SSD Ready is sued for the optimisation of your SSD drives. It will tell the user about the performance and writes that have been made to the drive along with the usage behaviour. Using these statistics, you can gauge the average lifespan of an SSD.

SSD Ready will get you data about the drives while boosting your performance using optimisation. In general, you can use this function to better the quality of health of your SSD that you’re currently using.

SSD Ready comes in two versions – the paid one and the free one.
Using the free version you can find out the performance and longevity of your drives. The paid one has the advanced features of helping you optimise things for enhancement of your SSD.

If you want to evaluate something you can choose from any of the partitions and also have the choice to select multiple partitions. It will fetch you the data in real time regarding the number and types of reads and writes to your disk. It will also tabulate the amount of data that is currently on your disk.

You can either wait out the complete process for checking the lifespan optimisation other information as well as do so in the middle of a test.

Your decisions on how to act on the results are based accordingly. If the time remaining for your SSD to wear out is short, you can look into buying options for next time. Otherwise, you can always back up your data and quit worrying.

8. SSD Tweaker

Another software for Microsoft Windows Operating System, the SSD Tweaker is bundled with features to help you optimise the SSD that you’re currently using. It has a user interface that is very easy to use and simple to get along with.

You can optimise and get the performance analysis for your drive with just a few clicks. There is an option for System Restore that comes with this software so that in the case of adverse scenarios you can always shift to the previous best settings and revert any data losses.

SSD Tweaker comes loaded with features that can help optimise your SSD. You can choose the Hibernation mode for better power consumption and even optimise Trim by changing individual settings.

You can check the Auto Tweak function to begin the tweaking with just one click from the user. It saves the headache of manually doing everything and saves you from going into the technical aspect, especially if you don’t like running a lot of commands.

You can choose from the paid version, which is for people who want a lot of advanced options and more controls with Trim optimisations. The free version comes with basic features like System Restore and managing the cache files.

9. Tweak SSD

Tweak SSD comes in two versions – the paid one that ha an abundance of extra features and the basic version which is free. Both are downloadable from the website.

Tweak SSD allows you to tweak your system statuses and tweak them in an understandable manner so that you can see the optimisation more clearly. It has a meter to show you clearly what is happening – green indicates the best form, the orange shows normal health and red reflects that your SSD is in a bad state and may require necessary action at the earliest.

You will also get advice about which setting would be applied best for performance that you desire and also based on the status of your SSD. The settings are a click away, and you can configure them any way you want.

10. SSD Fresh

This is a novel easily installed software that has a particular arrangement of all the disks that can be found on your system. You can quickly optimise and analyse performance using the clear cut directly to understand interface.

You are given the option to index the searches and drives using the Indexing option, and it also lets you defragment your disabled drives. You can select the self-monitoring feature so that you don’t have to be the software the entire time and it keeps optimising on its own.

One of its features is that it avoids unnecessary writing access and any other feature that might make the interface cumbersome.

Рейтинг статьи
Ссылка на основную публикацию